Book a demo

Hydrogen Storage Companies: Six Providers Across Four Technology Routes

Hydrogen Storage Companies: Six Providers Across Four Technology Routes | Patsnap
Hydrogen technology landscape

Hydrogen storage companies should be compared by storage route, application, operating conditions, system integration, and evidence of a current product or development program.

There is no single category of hydrogen storage companies. Some build high-pressure composite vessels, others engineer cryogenic liquid systems, and a smaller group develops chemical carriers or solid-state materials. The useful shortlist depends on whether the project is for mobility, stationary buffering, bulk transport, refueling infrastructure, or long-duration storage.

This guide presents six illustrative companies with current official evidence of hydrogen storage technology. It is a technology map, not a market-share ranking, investment recommendation, or claim that the companies are interchangeable.

Compare hydrogen storage companies by technology route first

The U.S. Department of Energy distinguishes physical storage as gas or liquid from materials-based approaches such as sorbents, chemical hydrogen storage materials, and metal hydrides.1 That distinction affects pressure, temperature, weight, footprint, charging and release energy, integration, safety engineering, and the applications a supplier can address.

Beyond identifying suppliers, R&D teams comparing hydrides, tank polymers, composites, coatings, or alloys can use Patsnap Eureka Materials for source-backed materials research across patents and scientific literature.2 Eureka Materials is not a hydrogen storage vendor directory or an independent company-ranking service, so supplier validation still requires current company and project evidence.

Start with the duty profile.
A vehicle tank, a port buffer, a seasonal storage project, and a long-distance carrier solve different engineering problems. A company can be relevant to one and unsuitable for another without being a weaker business.

How this hydrogen storage companies list was selected

Companies were included only when a current official page explicitly described a hydrogen storage product, system, or technology. The review covered compressed-gas vessels, liquid-hydrogen systems, liquid organic hydrogen carriers, and solid-state materials. Sources were verified on July 27, 2026.

What the list does not claim

  • It is not exhaustive and does not identify the largest or most valuable companies.
  • It does not compare prices, installed capacity, readiness, safety, or performance under normalized test conditions.
  • It does not treat planned projects as equivalent to operating commercial installations.
  • It does not infer a missing capability when a company’s public page is silent.

Company descriptions below stay close to the vendors’ own published scope. Buyers should request technical data, certifications, references, warranties, delivery terms, and project-specific engineering evidence directly.

Six hydrogen storage companies across four technology routes

The order groups comparable technologies together. It is not a performance ranking.

Compressed gas · Type IV vessels

NPROXX

NPROXX supplies Type IV high-pressure hydrogen storage vessels for vehicles. In June 2025, Cummins displayed a production-ready 700-bar hydrogen fuel delivery system using Type IV on-vehicle storage vessels from its NPROXX joint venture with ETC.3

View the Cummins / NPROXX source
Compressed gas · Type IV cylinders and systems

Hexagon Purus

Hexagon Purus provides Type IV high-pressure hydrogen cylinders and systems. Its official group profile lists mobility, ground storage, distribution, refueling, maritime, rail, and aerospace applications.4

Visit Hexagon Purus
Compressed gas · Vessels and integrated mobility systems

OPmobility

OPmobility describes high-pressure Type IV hydrogen vessels made with a liner and carbon-fiber shell. Its new-energy portfolio also includes fuel-cell stacks and integrated hydrogen systems for mobility applications.5

Visit OPmobility
Cryogenic liquid hydrogen

Chart Industries

Chart Industries offers liquid-hydrogen storage and fuel-system equipment. Its official product pages describe cryogenic storage tanks and onboard liquid-hydrogen systems for heavy-duty vehicle and marine applications.6

Visit Chart Industries
Chemical carrier · LOHC

Hydrogenious LOHC Technologies

Hydrogenious stores hydrogen by chemically binding it to the liquid organic carrier benzyltoluene. The company publishes StoragePLANT and ReleasePLANT concepts for stationary infrastructure and hydrogen supply chains.7

Visit Hydrogenious LOHC
Solid-state material · Adsorbent development

H2MOF

H2MOF is developing solid-state hydrogen storage based on porous materials. Its official site positions the technology for low-pressure, ambient-temperature storage and names stationary, transport, and mobility use cases.8 Public positioning should not be read as proof of commercial scale or project readiness.

Visit H2MOF

How to shortlist hydrogen storage companies for a real project

Define the storage duty before contacting vendors. A structured request for information should make the operating envelope and decision criteria explicit.

ApplicationOnboard mobility, refueling, distribution, stationary buffering, bulk transport, or long-duration storage.
Hydrogen stateCompressed gas, cryogenic liquid, adsorbed or absorbed solid, or chemical carrier.
Operating envelopeRequired capacity, pressure, temperature, fill and discharge rate, duty cycle, and footprint.
System balanceCompression, cooling, heating, purification, controls, transfer equipment, and energy demand.
QualificationApplicable codes, certifications, testing evidence, installation references, and maintenance requirements.
Commercial scopeEngineering responsibility, manufacturing location, delivery schedule, warranty, service, and end-of-life plan.

Compare the complete storage-and-release system rather than the storage medium alone. Vessel mass, insulation, thermal management, pumps, compressors, catalysts, purification, and controls can change the project-level result.

Where patent evidence fits into company evaluation

Patent documents can help identify technical themes, materials, vessel architectures, thermal-management approaches, and ownership changes. They can also reveal whether two companies use different routes to address the same engineering constraint.

However, a patent count does not prove commercial readiness, product performance, manufacturing capacity, or freedom to operate. Company websites, certifications, project records, regulatory evidence, and direct technical diligence are still required. If a project advances toward development or launch, novelty and FTO are separate IP workflows that should be handled with qualified professional review.

Do not compare headline storage density alone.
Check whether a figure describes the material, vessel, or complete system, and whether it uses comparable pressure, temperature, usable capacity, cycling, and test conditions.

Frequently asked questions

Which companies make high-pressure hydrogen tanks?
The illustrative list includes NPROXX, Hexagon Purus, and OPmobility, each of which publishes current information about Type IV hydrogen vessels or systems. Project fit still depends on application, pressure, packaging, certification, and supply scope.
Which companies work on solid-state hydrogen storage?
H2MOF publicly describes a porous-material, solid-state approach. Other metal-hydride developers and research programs also exist, but this article includes only companies whose current official pages provided sufficiently clear evidence for the selected scope.
Are liquid hydrogen and LOHC the same?
No. Liquid hydrogen is cryogenic molecular hydrogen. An LOHC stores hydrogen through reversible chemical binding to an organic carrier, followed by a release process at the destination.
How should I compare hydrogen storage patents?
Define the technology route and application, group patent families, read claims and legal status, and compare technical features under consistent definitions. Do not use raw document counts as a stand-alone company ranking.

Sources and verification

  1. Hydrogen Storage, U.S. Department of Energy, verified July 27, 2026.
  2. Patsnap Eureka Materials, verified July 27, 2026.
  3. Cummins shows an array of empowering new technology at Hannover, Cummins, published June 27, 2025; verified July 27, 2026.
  4. Hexagon Purus company profile, Hexagon Group, verified July 27, 2026.
  5. New energies and high-pressure hydrogen storage, OPmobility, verified July 27, 2026.
  6. Fueling systems and liquid hydrogen storage, Chart Industries, verified July 27, 2026.
  7. Stationary LOHC applications, Hydrogenious LOHC Technologies, verified July 27, 2026.
  8. Solid-state hydrogen storage technology, H2MOF, verified July 27, 2026.

Verification note: Company inclusion and descriptions were checked against current official pages on July 27, 2026. No normalized product testing, market-share analysis, financial review, or independent company ranking was conducted. Company plans and product scope may change.

Research hydrogen storage materials with source-backed evidence

Use Eureka Materials to investigate hydrides, polymers, composites, coatings, alloys, and related material questions across patents and scientific literature.

Explore Eureka Materials

Your Agentic AI Partner
for Smarter Innovation

Patsnap fuses the world’s largest proprietary innovation dataset with cutting-edge AI to
supercharge R&D, IP strategy, materials science, and drug discovery.

Book a demo